x
Search Inventory    Search Products & Site

John Deere 225 E-Cut™ Electric

Double tap to zoom

 

Features

Mow up to 50,000 Square Feet on a Single Charge

E-Cut Electric Walk Greens Mower being used on a the green of a golf course.

A high capacity 58-volt, 3.56 kwh (MAX) Lithium-ion battery provides for up to 50,000 square feet of mowing on a single charge. These virtually silent machines open the operating window for earlier mowing and later evening mowing and are friendly to both operators and neighbors alike. A standard 700-watt charger fully charges the machine from 0% capacity to 100% capacity in 5-6 hours.

Easy Operation With Integrated Operator Presence Bail + Traction Clutch and TechControl Display

Close up view of the controls of an E-Cut Electric Walk Greens Mower

The operator presence bail is dual function, not only stopping the machine when releasing the bail, but also engaging the clutch and initiating machine forward movement when pulled leftward and pushed forward against the handlebar. In fact, all controls on Deere walk greens mowers move forward to initiate movement, including the electric PTO switch, speed control lever, and park brake disengagement. The standard passcode-protected TechControl display is intuitive, easy to use, and allows for controlling operational parameters such as mow speed, transport speed, cleanup pass speed, and turn speed.

Ball Joint Mounting System Provides Contour Following in All Directions

Close up view of the 220 E-Cut Hybrid ball joint mounting system

The Quick Adjust 5 cutting unit is mounted to the traction unit frame with a simple ball joint mechanism. This ball joint allows the cutting unit to rotate in all directions, fore and aft, side to side, and up and down to gently follow nearly any contour. It also allows the cutting unit to steer in cleanup passes, maximizing quality of cut. This ball joint, combined with the electric reel drive, means no mechanical linkage to restrict the cutting unit movement.

Specifications

Warranty

Standard Factory2-year machine, 4 year reel motor and reel motor controller
OptionalPowerGard™
BatteryYears 1 and 2 - 100%, Year 3 - 75%, Year 4 - 50% Parts and Labor

Traveling Device

Forward Speed - With Transport Wheels at 3000 Engine RPM7.2 km/h
Forward Speed - With Transport Wheels at 3000 Engine RPM4.5 mph
Rear RollerAluminum
Rear Roller - Diameter190 mm
Rear Roller - Diameter7.5 in.
Front Roller (Grooved or Smooth)Machined steel, for cutting height adjustment
Front Roller (Grooved or Smooth) - Diameter50 mm
Front Roller (Grooved or Smooth) - Diameter2 in.

Optional Rotary Brush And Greens Tender™ Conditioner (GTC)

BrushInterlocked with reel, rotation in reverse direction; nylon
Brush60 mm
Brush2.375 in.
Adjustable Brush or Cutter HeightBrush even with height-of-cut; GTC below height-of-cut maximum
Adjustable Brush or Cutter Height0.8 mm
Adjustable Brush or Cutter Height0.0313 in.
Gear DriveGear driven from reel shaft, opposite direction of reel, rotation powers brush or GTC vertical cutter

Battery

Battery TypeLithium-ion
Battery Quantity1
Battery Capacity3.56 kwh (MAX)
Run Time50,000 sq ft (4,645 m²) on a single charge
Charger700 watt offboard
Charge Time5-6 hours from 0% to 100%

Dimensions

Length (With Tires Installed)105 cm
Length (With Tires Installed)41 in.
Width (With Tires Installed)94.6 cm
Width (With Tires Installed)37.25 in.
Height (With Tires Installed)127 cm
Height (With Tires Installed)50 in.
Weight (Less GTCs, Gear Drive And Transport Wheel With Catcher)138 kg
Weight (Less GTCs, Gear Drive And Transport Wheel With Catcher)304.2 lb.

Grass Catcher

Size3.2 kg
Size7 lb.
TypePolyethylene

Cutting Equipment

Cutting Width56 cm
Cutting Width22 in.
Cutting Height (Minimum)-Optional - 2.5-mm Bedknife2.5 mm
Cutting Height (Minimum)-Optional - 2.5-mm Bedknife0.098 in.
Cutting Height (Maximum)-Optional - 2.5-mm Bedknife22 mm
Cutting Height (Maximum)-Optional - 2.5-mm Bedknife0.875 in.
Cutting Height (Minimum)-Optional - 2.0-mm Bedknife2 mm
Cutting Height (Minimum)-Optional - 2.0-mm Bedknife0.078 in.
Cutting Height (Maximum)-Optional - 2.0-mm Bedknife22 mm
Cutting Height (Maximum)-Optional - 2.0-mm Bedknife0.875 in.
Frequency of Clip Standard14-blade: 0.54 mm/km/h (0.034 in./mph); 11-blade: 0.69 mm/km/h (0.044 in./mph); Adjustable in TechControl display

Reel

Reel Diameter127 mm
Reel Diameter5 in.
Number Of Blades11 or 14 blade
MaterialHeat-treated chromium molybdenum steel

Sound Levels

Operator Ear72 dBA
Measuring StandardISO 11201
Attachments InstalledGTCs, reels engaged

Certificate

TypeANSI B71.4-2017