
Features
All in One Solution for Wildlife Food Plots
- 6' Model Available
- Three-Point Hitch - Cat. I, II Free Link
- Three-Point Hitch - Cat. I, II Quick Coupler Hitch
- Floating Link Allows Seeder to Pivot and Follow the Contour of the Land
- 18" Notched Disc Blades, Spaced at 7.5", Can be Adjusted to 10 or 15 Degrees Depending on Amount of Tillage Needed
- Two Rows of Mini S-Tine Cultivator Teeth
- Teeth are Spaced at 15" on Each Bar for a Nominal Spacing of 7.5"
- S-Tines are Fully Adjustable and Can be Removed if Only Disc Tillage is Required
- Double Seed Box Capacity
- Micro-Metered Box Will Plant Small Granular-Type Seeds at Precise Rates
- Seed Box Equipped with Brush Agitator Will Plant Larger Seeds and Seed Mixtures Containing a Variety of Seeds
- User Friendly Seed Rate Adjustments
- Seed Box Disconnect Klik Pin Disconnects the Seed Drive for Seed Rate Calibration and Prevents Wear and Tear on the Seed Box Drives in Tillage-Only Mode
- Positive Ground Driven Seed Metering System
- Pulverizer Roller Packs Seeds Into the Soil for Maximum Seed to Soil Contact
- 1.5" Self-Aligning, Greaseable Bearings Add to Ruggedness and Reliability of the Seeder
- Coil Tine Harrow Available for Additional Leveling
- Cargo/Rock Box Available
- Powder Coat Paint
Specifications
Model | FPSB-6 |
Approximate Weight | 1,389 lbs. (625 kg) |
Working Width | 6 ft. 0 in. (1.8 m) |
Overall Width | 6 ft. 10 in. (2.05 m) |
Overall Transport Height | Dependent Upon Tractor |
Overall Height (Working) | 3 ft. 5 in. (1.03 m) |
Overall Length | 5 ft. 8 in. (1.7 m) |
Disc Assembly | |
Blade Spacing | 7.5 in. (191 mm) |
Blade Size (Main) | 18 in. (457 mm) x 9 ga. |
Blade Size (End) | 16 in. (406 mm) x 11 ga. |
Arbor Bolt | 1.125 in. (28.6 mm) Square |
Gang Bearings | 1.125 in. (28.6 mm) Greaseable |
Angle of Operation | 10 or 15 Degrees |
Harrow Assembly | |
Tooth Bars | 2 |
Type of Teeth | 10" Mini S-Tines with Reversible Points |
Tooth Spacing | Nominal 7.5 in. (191 mm) |
Tooth Depth of Operation | 0 to 3 in. (76.2 mm) in 1 in. (25.4 mm) Increments |
Under Bar Clearance | 11.5 in. (292 mm) |
Seeder Assembly | |
Seed Box Type | All Steel Construction with Cover |
Seed Box Capacity | 2.625 bu. Each Box |
Seed Meters | "Micro-Meter" and Brush Agitator |
Seed Meter Drive | Positive Ground Driven with Disconnect |
Seed Meter / Opening Spacing | 6 in. (152 mm) / 4 in. (102 mm) |
Seed Delivery | Broadcast with Wind Deflector Tray |
Pulverizer Assembly | |
Working Width of Pulverizer | 6 ft. 0 in. (1.8 m) |
Pulverizer Wheels | 9.5 in. (241 mm) Gray Cast Iron |
Number of Wheels | 31 |
Pulverizer Scraper | Standard |
Pulverizer Axle Bearings | 1.5 in. (38.1 mm) Greaseable |
Axle Size | 1.75 in. (44.5 mm) |
Floating Hitch | Cat. I-II Quick Hitch Compatible |
Micro-Meter Seed Box Kit | Standard |
Brush Agitator Seed Box Kit | Standard |
Coil Tine Drag | Optional |
Cargo / Rock Box Kit | Optional |
Posi-Drive Pulverizer Roller | Optional (In Lieu of Standard Pulverizer Assembly) |
Powder Coat Paint, Red | Standard |
Horsepower Requirements | 35 HP (26.88 kW) and up |
Recommended Operating Speed | 3 to 5 MPH (5 to 8.3 km/h) |