x
Search Inventory    Search Products & Site

John Deere 3043D

John Deere 3043D

Double tap to zoom

John Deere 3043D

 

Features

  • Standard 4wd for Maximum Traction
  • Heavy Duty Gear Drive Transmission 8F/8R for heavy hauling
  • On-board diagnostics including Service Advisor
  • Category 1 3-Pt Hitch compatible with dozens of attachments

Specifications

Key Specs

Engine power (gross) 31 kW
42.2 hp
Power take-off (PTO) power 27.1 kW
36.3 hp
Steering hydraulics 16.8 L/min
4.4 gpm
Implement hydraulics 19.2 L/min
5.1 gpm
Hitch type Category 1
Lift capacity, 24-in. behind link arms 757.4 kg
1670 lb
Standard transmission; forward/reverse 8F/8R synchromesh shuttle shift gear transmission
Cruise control No
Approximate shipping weight (open-station; cab) 1288 kg
2840 lb
Wheelbase 157.4 cm
62 in.

Engine

Family  
Manufacturer Yanmar
Engine model 3TNV86CT-KJPT
Engine power (gross) 31 kW
42.2 hp
Power take-off (PTO) power 27.1 kW
36.3 hp
Rated engine speed 2400 rpm
Injection pump type High pressure common rail direct injection
Aspiration Turbocharged
Emissions compliance Final Tier 4
Cylinders/displacement 3 / 1.57 L
3 / 95.8 cu in.
Number of cylinders Three
Cylinder liners Cast-in-block
Bore and stroke 88 x 90 mm
3.46 x 3.54 in.
Compression ratio 19.1:1
Lubrication Pressurized
Cooling system Water pump
Air cleaner Dual element
Engine torque at rated speed 105.7 Nm
78 lb-ft
Fuel tank capacity 36.7 L
9.7 U.S. gal.

Electrical

Battery size 600 CCA
Alternator (12-V) 55 amp
Starter size 1.4 kW
1.9 hp

Fuel system

Type High pressure common rail direct injection

Transmission

Standard transmission; forward/reverse 8F/8R synchromesh shuttle shift gear transmission
Left-hand reverser Yes
Transmission gear ranges 4 gears and 2 ranges
Final drive Spur Gear
Brakes Wet disc
Steering Power steering
Axle capacity Front
880 kg
1940 lb
Rear
1600 kg
3527 lb
Creeper No
Cruise control No
Differential lock Yes

Hydraulics

Type Open center
Pump rated output Steering
16.8 L/min
4.4 gpm
Implement
22.4 L/min
5.9 gpm
39.2 L/min
10.3 gpm
Pump type Single gear
Maximum operating pressure 172.4 bar
2500 psi
Draft control sensing Position control
Remote control valves available Up to two (optional)

3-point hitch

Type Category 1
Lift capacity, 24-in. behind link arms 757.4 kg
1670 lb

Power take-off (PTO)

Standard 540 rpm at 2400 rpm
Control Mechanical
Clutch Transmission
Brake (for mid and rear PTO) Wet disc

Fluid capacities

Crankcase with filter 4.5 L
4.8 qt
Transmission and hydraulic system 33 L
34.8 qt

Final drive

Type Bull Gear

Operator station

Rollover protective structure Type
Foldable
ASABE S478
Platform - flat/straddle Semi-flat
Gear shift location - console/floor Right-hand side

Dimensions

Wheelbase 157.4 cm
62 in.
Front axle clearance 35 cm
14 in.
Turning radius with brakes 1.63 m
5.3 ft
Approximate shipping weight (open-station; cab) 1288 kg
2840 lb

Tires

Front Farm - 7-14
Turf - 27x8.5-15
R4 - 25x8.5-14
Rear Farm - 11.2-24
Turf - 41x14-20
R4 - 15-19.5

Miscellaneous

Toolbox Yes
Tilt steering wheel No
12-V Outlet No