x
Search Inventory    Search Products & Site

Unverferth 1315 (Prior Model) / NOT AVAILABLE

Unverferth 1315 (Prior Model)

Double tap to zoom

Unverferth 1315 (Prior Model)

 

Features

Extreme Unloading

  • Dyna-Torque auger on models 1317 and 1117 combines a 22" diameter auger in the sump feeeding into a 20" diameter auger for unloading speeds up to 620 bushels per minute
    • By increasing the unloading rate out of the sump, unloading efficiency is improved compared to a conventional, full-length 22" diameter auger
  • Model 1017 featuers a 20" diameter auger for unloading speeds up to 500 bushels per minute
  • Auger intake (sump) is recessed below the floor line of the tank for complete clean out and faster unloading
    • Wheel operated clean out door for easy clean out and convenient pit dumping

Unloading Control

  • Hydraulically controlled 4-Way directional downspout provides 4 feet of left/right and 2 feet of in/out control for easily topping off trucks
  • Dual auger mounted unloading lights with hinge-mounted switch for accurate connection and easier night time unloading

Smooth Operation

  • Patented auger features a U-Joint with flex-drive coupler for unmatched durability and angles the auger outward for extreme upward, outward and forward reach

  • Patented cushioned upper auger connection for a smooth and stress-free auger engagement

  • Upper and lower auger flighting is synchronized for greater capacity, dependability and smooth operation

  • Computer-balancing virtually eliminates any vibration for smooth operation and longer life

  • Exclusive, full-length Extended-Wear flighting is 7/16" thick for longer life
  • Heavy-duty gearbox is static-rated at 330 h.p. and dynamic-rated at 153 h.p. for long-term, trouble-free use 

    • Features an extra large 1 3/4" full-length output shaft and 5-pin drive hub connection to the auger for handling the toughest unloading scenarios, even wet corn

Specifications

Model Number 1317 1117 1017

*Capacities measured with #2 corn at 15% moisture, 56# test weight.

Due to continuing improvements in the design and manufacture of Unverferth products, all specifications contained herein are subject to change without notice.

Capacity* 1300+ 1100+ 1000+
Unload Speed (bu/min) 620 620 500
Approximate Empty Weight 17,460 14,400 13,420
Approximate Full Tongue Weight 6,400 6,300 6,000
Tire Size 520/85x42 Duals 520/85x42 Duals 900/60R32 BIAS LI176
A 20'4" 19'6" 19'6"
B 10'4" 10'4" 10'4"
C 25'6" 21'10" 21'10"
D 33'10" 29'11" 29'11"
E 13'9" 13'9" 13'9"
F-Adj. Min/Max 6'6"-8'6" 6'6"-8'6" 6'6"-8'6"
G 12'4" 12' 11'4"
H 11'5" 11' 10'8"
I 1'5" 1'5" 1'5"
J - Tandem Duals 60" or 72" 60" or 72" 60" or 72"
J - Singles** 120" 120" 120"
K - Tandem Duals 6'10" 6'10" 6'10"
K - Singles** 13'10" 12'10" 12'10"
L 120" or 144" 11'11" 11'11"
M 12' 12' 12'
M-Tracks 12'10" 12'10" 12'10"
N 11'11" 11'11" 11'11"

Loaded Tire Ground Pressure - P.S.I. calculated at the 3" penetration level.
For use as a comparative guide in choosing between various tire options

42"x148" Equalizer Tracks 11.20 - -
42"x131" Equalizer Tracks 13.00 10.50 -
36"x148" Tracks 13.29 - -
36"x131" Tracks - 12.66 10.94
650/65x42 Duals 22.34 17.06 -
520/85x42 Duals 24.06 18.78 -
480/80x42 Duals - 22.77 -
520/85x38 Duals - 19.80 -
1250/50x32 (201A8 LI) 22.01 - -
1250/50x32 (188A8 LI) - 17.00 15.24
1050/50x32 - 19.20 16.80
35.5x32 (193A8 LI) - 25.20 -
35.5x32 - - 18.27
900/60x32 - - 24.89