x
Search Inventory    Search Products & Site

Landoll 850-25

Double tap to zoom

Landoll 850-25

 

Features

  • Laser Cut, Robotically Welded Frame
  • T-Type Self-Leveling Hitch
  • 7 1/2 Degree Wing Float Up and Down
  • Rock Flex Disc Bearing Standards
  • Mechanical Ratchet Depth Adjustment
  • 20” Low Concavity Disc Blades Spaced at 7 1/2”
  • 8 Degree Gang Angle
  • Spring Clamp Shanks with 150 lbs. Point Load
  • 140 lbs. Point Load on S-Tine Shanks
  • Edge Bent Shanks
  • True 8” Shank Spacing
  • Out-Rigger Gauge Wheels on 3 Section Models
  • Yellow Powder Coat Paint
  • Safety Warning Lights

Specifications

Model 850-25
Approximate Weight 9,421 lbs. (4,273 kg)
Working Widtd 24 ft. 8 in. (7.5 m)
Transport Widtd 12 ft. 0 in. (3.7 m)
Transport Height 12 ft. 9 in. (3.9 m)
Number of Shanks 37
Shank Type Spring Clamp, Edge Bent Shank
Shank Size 0.5625 in. x 1.75 in. (14.3 x 44.5 mm)
Point Load 150 lbs. (68 kg)
Shank Spacing 8 in. (203 mm)
Under Frame Clearance 25.5 in. (648 mm)
Sweeps 10 in. (254 mm)
Number of Blades 40
Blade Diameter 20 in. (508 mm)
Blade tdickness 0.197 in. (5.0 mm)
Blade Concavity Low Concavity
Blade Spacing 7.5 in. (191 mm)
Reversible Blade Scrapers 4 in. x 0.179 in. (102 x 4.5 mm)
Gang Protection Rock Flex Mount
Gang Spool 3.5 in. x 3.0625 in. (89 x 78 mm)
Gang Angle 8 Degree
Gang Shaft 1.5 in. (38.1 mm)
Gang Bearings 1.5 in. (38.1 mm) Flange Type Greaseable
Frame 6 in. x 2 in. x 0.25 in. (153 x 50.8 x 6.4 mm) and 4 in. x 3 in. x 0.25 in. (102 x 76.2 x 6.4 mm)
Frame Construction Laser Cut/Matchcut Components, Robotically Welded
Transport Lift Axles 4.5 in. x 0.25 in. (114 x 6.4 mm)
Wing Axles Walking Beams
Walking Tandems Standard
Wing Flex 7.5 Degrees Up/Down
Tire Size - Main Frame (4) 9.5L x 15-8 Ply
Wheel Hubs - Main Frame 6-Bolt
Spindles - Main Frame 2 in. (50.8 mm) Slip-In Spindles
Tire Size - Wing Frame (4) 9.5L x 15-8 Ply
Wheel Hubs - Wing Frame 6-Bolt
Spindles - Wing Frame 2 in. (50.8 mm) Slip-In Spindles
Hitch Type Self-Leveling witd Manual Adjustment
Hitch Category Cat. III Single Lip
Machine Deptd Control Adjustment Rod
Outrigger Gauge Wheels Standard
Safety Warning Lights and SMV Emblem Standard
Safety Chain Kit Standard
Powder Coat Paint, Yellow Standard
10 in. Ultra Wing Sweeps Optional
Hydraulic Gang Adjustment Optional
Walking Tandems Standard
Rear Hitch Optional
Attachment Options:  
5-Bar Spike Flex Harrow Optional
3-Bar Spike Witd Roller Optional
4-Bar Spring Tine Harrow Optional
3-Bar Spring Tine Witd Roller Optional
Horsepower Requirements 8 to 10 HP (6 to 7 kW) per Foot