| Model |
John Deere X739 Signature Series Lawn Tractor |
| ENGINE |
| Power |
25.5 hp (19 kW) |
| Displacement |
45.5 cu in. (745 cc) |
| Manufacturer/model |
FD750D EFI |
| Type |
Electronic fuel injection (EFI), overhead valve, full-pressure lube, oil filter |
| Cylinders |
V-twin, cast-iron liners |
| Governor |
Mechanical |
| Choke/speed control |
No choke required |
| Cooling method |
Liquid |
| Air cleaner |
Dry, replaceable with foam precleaner |
| Oil drain |
No tools |
| FUEL SYSTEM |
| Type |
Gasoline |
| Fuel delivery |
Electronic fuel injection |
| Fuel gauge |
Gauge on dash |
| Fuel tank location |
Rear |
| Fuel fill opening |
On left fender, 3 in.7.6 cm |
| Fuel tank capacity |
5.2 U.S. gal.19.7 L |
| ELECTRICAL SYSTEM |
| Battery |
12 V (300 CCA) |
| Charging system |
Flywheel alternator, regulated, 20 amp |
| Engine starter |
Solenoid shift |
| Hourmeter |
Yes |
| Headlights |
Two standard, halogen, 37 W |
| Taillights or reflector |
Taillights |
| Backup lights |
Yes |
| Rear work lights |
Yes |
| 12-V outlet |
Yes |
| TRANSAXLE |
| Type |
K90 hydrostatic integrated with transaxle |
| Control |
Twin Touch™ pedals |
| Cruise control |
Yes |
| Oil cooler |
Yes |
| Oil filter |
Replaceable suction side 10 micron |
| Differential lock |
Standard |
| Forward speed |
0-8.5 mph (0-13.7 km/h) |
| Reverse speed |
0-6 mph (0-9.7 km/h) |
| Brakes |
Internal wet disc |
| CHASSIS |
| Frame |
Welded heavy-duty |
| Primer/paint |
E-coat/powder |
| Weight bracket |
Standard front - holds up to four Quik-Tatch weights, 42 lb (19 kg) |
| Receiver hitch |
Yes, front |
| Front axle |
JDM BA8 nodular iron casting |
| Spindle bushings |
| Front tires |
18 x 8.5-10 HDAP |
| Rear tires |
26 x 12-12 HDAP |
| Hood material |
Noryl GTX902, painted |
| Fender deck material |
RIM with in-mold paint |
| Floor mats |
Sure-grip rubber |
| Storage |
Covered toolbox |
| Service interval decal |
Yes |
| Fender handles/grips |
Handles |
| Cup holder |
Yes |
| Equipment mounting |
Optional category 1 3-point hitch |
| STEERING |
| Type |
Hydraulic power |
| Four-wheel steer |
Yes |
| Steering wheel |
14 in. (35.6 cm) |
| Tilt steering wheel |
Standard, six position |
| Turning radius |
21 in. (53.3 cm) |
| Uncut circle radius |
54 HC, 10 in. (25.4 cm) 60 HC, 6 in. (15.2 cm) |
| SEAT |
| Type |
Two piece professional high back |
| Seat back height |
21 in. (53.3 cm) |
| Armrests |
Optional |
| Fore-aft adjustment |
While seated, slide rail, 14-position, 7 in. (17.8 cm) |
| Seat suspension |
Six-position parallel arm |
| LIFT SYSTEM |
| Type |
Two-function hydraulic |
| Hydraulic outlets |
Four, standard |
| Mower cut height |
1-5.25 in. (2.5-13.3 cm) |
| Cut height increments |
0.25 in. (0.64 cm) |
| Preset cut height |
Yes |
| MOWER DECK |
| Type |
Side discharge |
| Cutting width |
Accel Deep™ mower deck, 48 in. (122 cm) High capacity mower deck, 54, 60 in. (137, 152 cm) |
| Construction |
Stamped steel deck shell |
| Mower deck material |
48A, 10 gauge 0.135 in. (3.4 mm) 54 HC and 60 HC, 9 gauge 0.15 in. (3.8 mm) |
| Mower wash port |
Yes |
| Mower drive system |
Hydraulic clutch, shaft |
| Mower wheels |
Four |
| Mower wheel adjustment |
Spring-loaded pin |
| Mower level adjustment |
Exact Adjust ports and onboard deck-leveling gauge |
| MOWER ATTACHABILITY |
| Type |
Roll under tractor (48A)Drive-over deck (54, 60 HC) |
| Front draft arms |
Overcenter |
| Rear draft arms |
V-align |
| Mower wheels rotate |
Yes, 90 degrees for easy mower removal (48A), N/A (54 HC, 60 HC) |
| Drive system |
Shaft or AutoConnect |
| SAFETY |
| Meets ANSI standard |
Yes |
| Meets OPEI standard |
Yes |
| Backup protection |
Reverse Implement Option (RIO) |
| Safety video |
Yes |
| BUYER'S NOTES |
| Notes |
Hydraulic modulated PTO clutch for smooth mower and implement engagementOne-piece hood for easy engine access540 rpm rear PTO and 3-point hitch options available |
| Warranty |
4 year/700 hour bumper-to-bumper** (**Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.) |
| OPTIONAL EQUIPMENT |
|
| Mowers |
48A, 54 HC, 60 HC |
| Rear bagger |
7, 14, 19 bu (250, 500, 670 L) |
| Powered material collection |
Power Flow, 7, 14, 19 bu (250, 500, 670 L) |
| Mulching system |
Yes, MulchControl™ |
| Front thatcher |
38, 46, 54 in. (96.5, 116.8, 137.2 cm) |
| Front blade |
54 in. (137.2 cm) |
| Mid-mount blade |
| Snow blower |
Two-stage, 47, 54 in. (119.4, 137.2 cm) |
| Rotary broom |
52, 60 in. (132.1, 152.4 cm) |
| Rotary tiller |
42, 48 in. (106.7, 121.9 cm) |
| Sleeve hitch |
| 3-point hitch |
Category 1 |
| Rear power take-off (PTO) |
540 rpm |
| Plow, moldboard |
Adjustable, 8-14 in. (20.3-35.6 cm) |
| Box scraper |
48 in.121.9 cm |
| Cultivator |
Adjustable, 30-46 in. (76.2-116.8 cm) |
| Rear blade |
60 in. (152.4 cm) |
| Disk harrow |
Adjustable, 42-52 in. (106.7-132.1 cm) |
| Landscape rake |
60 in. (152.4 cm) |
| Sprayer |
Tow-behind, 15, 25, 45 U.S. gal. (56.8, 94.6, 170.3 L) Mounted, 25 U.S. gal. (94.6 L) |
| Spreader |
Tow-behind, 125, 175 lb (57.7, 79.4 kg); Mounted, 125 lb (57.7 kg) |
| Front bumper |
Standard bumper/weight bracket |
| Brush guard |
Yes |
| Weather protection |
Hard-side cab, weather enclosure |
| Rear receiver hitch |
1.25 x 1.25 in. (3.18 x 3.18 cm) |
| Bucket holder |
Yes, double bucket |
| Grass striping |
Grass groomer kit, 48-in. (122-cm) mower only |
| Tractor shovel |
54 in. (137.2 cm) |
| Front loader |
Not available |
| DIMENSIONS |
| Height |
51.2 in. (130 cm) |
| Overall length |
75 in. (190.5 cm) |
| Wheelbase |
55.7 in. (141.5 cm) |
| Width with mower |
48A, 62.5 in. (159 cm) 54 HC, 64.5 in. (163.8 cm) 60 HC, 74 in. (188 cm) |
| Width with mower (deflector raised for storage) |
48A, 53.6 in. (136 cm) 54 HC, 57.5 in. (146.1 cm) 60 HC, 62 in. (157.5 cm) |
| Width without mower |
48 in. (121.9 cm) |
| Weight |
No fuel or mower, 1,045 lb (474 kg) |
