x
Search Inventory    Search Products & Site

John Deere 210L

John Deere 210L

Double tap to zoom

John Deere 210L

 

Features

Mechanical-Front-Wheel Drive

  • Mechanical-front-wheel drive (MFWD) and differential lock can be engaged on-the-go to give extra traction in poor underfoot conditions or for moving heavy loads. Optional limited-slip front axle delivers 65 percent of available power to the tire with the best traction. For true all-wheel-drive pulling power.

 

Engine

  • Rugged FT4/Stage IV PowerTech™ Plus diesel engine employs cooled exhaust gas recirculation and selective catalytic reduction system.
  • No diesel particulate filter (DPF) is needed on either model, reducing downtime and expense.
  • Variable-speed electronically controlled fan on the 210L automatically speeds up or slows down, operating only as needed to keep things cool. Helps conserve power and fuel, while reducing noise.

 

Eco Mode

  • Standard economy mode helps maximize fuel usage in lighter-work applications with minimal effect on machine performance.

 

Ride Control

  • With ride control activated, front loader hydraulic cylinders act as a shock absorber, smoothing travel over rough terrain, helping full loads reach their destination, and reducing operator fatigue.

 

Productivity

  • New hitch design makes it easier to position the box blade over the pile for more versatility and productivity.
  • Integral three-point hitch accommodates a variety of tools.

 

Operator Comfort

  • Choose cab or open operator station.
  • Higher canopy with wider and lower step provides better visibility over the hood and to the corners of the front bucket, as well as to the rear box blade. Makes it easier to service under-canopy components, too.

 

Easy Maintenance

  • Two-position tilt hood provides same-side ground-level access to engine and transmission dipsticks, engine-oil fill, fuel and air filters, and coolant reservoir. Fuel fill is also closely convenient.

Specifications

DRIVELINE

Engine manufacturer John Deere
Engine model PowerTech Plus 4045HT082
Emission rating Tier 4
Displacement, ltr (Inches) 4.5 (276)
Rated speed, rpm 2244
Net output, kW (hp) 69 (93) @2244rpm
Transmission type Power Shift
Number of speeds - forward 4
Number of speeds - reverse 2
Front axle type Mechanical FWD
Service type Wet Multi Disc
Service actuation Hydraulic w/Power Assist

DIMENSIONS

Overall length, mm (ft/in) 5310 (17 ft 5 in)
Minimum transport height, mm (ft/in) 2640 (8 ft 8 in) Cab Height
Overall width, mm (ft/in) 2130 (7 ft )
Std shovel width, mm (inches) 2184 (86)
Dump Clearance @ 45 deg, mm (ft/in) 2650 (8 ft 8 in)
Dump Reach, mm (inches) 737 (29)
Bucket Hinge Pin - Max Height, mm (ft/in) 3340 (10 ft 11 in)
Coupler Optional Worksite Pro Hydraulic

CAPACITIES

Fuel tank capacity, ltr (gallons (US)) 117.3 (31)
Hydraulic tank capacity, ltr (gallons (US)) 45 (11.9)
Shovel cap SAE heaped, m (yd) 0.96 (1.25)
Alternator capacity, Amp 150 with Cab option

PERFORMANCE

Max. Forward Speed, kph (mph) 31.7 (19.7)
Max. Reverse Speed, kph (mph) 12.9 (7.8)
Lift Capacity to Full Height, kg (lbs) 2466 (5432) Heavy-duty
Oscillation angle, 22
Power Take Off Optional
PTO rated speed, rpm 540
Breakout force std shovel, kN (lbf) 38.7 (8700)
System voltage, V 12
Pump type Gear
Pump flow, lt/min (gallons (US) / min) 96 (25.3)
System pressure, bar (PSI) 189.6 (2750)

WEIGHTS

Operating weight, kg (lbs) 5137 (11326)