x
Search Inventory    Search Products & Site

John Deere 4044M

John Deere 4044M

Double tap to zoom

John Deere 4044M

 

Features

  • Powerful and reliable Yanmar Diesel Engine
  • AutoConnect deck compatible for deck attach/detach in seconds
  • Power reverser or e-hydro transmission with Twin Touch pedals

Specifications

Key Specs

Engine power (gross) 33.3 kW
45.3 hp
PS at 2600 rpm
SAE J1995 rated power
Power take-off (PTO) power 25.2 kW
33.9 hp
Per SAE J1995
Steering hydraulics 23.5 L/min
6.2 gpm
Implement hydraulics 34.3 L/min
9.1 gpm
Hitch type Category 1
Lift capacity, 24-in. behind link arms 995 kg
2194 lb
Standard transmission; forward/reverse eHydro transmission (eHST)
Cruise control Standard
Approximate shipping weight (open-station; cab) Rollover protective structure (ROPS) - 1315.4 kg
2900 lb
Cab - 1619.3 kg
3570 lb
Wheelbase 172.7 cm
68 in.

Engine

Family EYDXL1.57HDA
FYDXL1.57HDA
GYDXL1.57HDA
Manufacturer Yanmar
Engine model 3TNV86CHT-MJT
Engine power (gross) 33.3 kW
45.3 hp
PS at 2600 rpm
SAE J1995 rated power
Power take-off (PTO) power 25.2 kW
33.9 hp
Per SAE J1995
Rated engine speed 2600 rpm
Type Diesel
Injection pump type High pressure common rail direct injection
Aspiration Turbocharged and charge air cooled
Emissions compliance Final Tier 4
Cylinders/displacement 3 / 1.57 L
3 / 95.7 cu in.
Number of cylinders Three
Cylinder liners Cast-in-block
Bore and stroke 86 x 90 mm
3.4 x 3.54 in.
Compression ratio 19.1:1
Lubrication Pressurized
Cooling system Liquid
Air cleaner Dual element
Engine torque at rated speed 112 Nm
90 lb-ft
Fuel tank capacity Rollover protective structure (ROPS): 37.4 L
10 U.S. gal.
Cab: 47.6 L
12.6 U.S. gal.

Electrical

Battery size 500 CCA
Alternator (12-V) 75 amp
Starter size 1.4 kW
1.9 hp

Fuel system

Type High pressure common rail direct injection
Fuel consumption
10.6 L/hr
2.8 gph

Transmission

Standard transmission; forward/reverse eHydro transmission (eHST)
Left-hand reverser No
Transmission gear ranges 12F/12R PowrReverser
3-range, infinitely variable
Final drive Bull Gear
Brakes Multi-plate wet disc
Steering Hydrostatic power steering
Axle capacity Front
1450 kg
3197 lb
Rear
1850 kg
4079 lb
Creeper SpeedMatch standard
Cruise control Standard

Hydraulics

Type Open center
Pump rated output Steering
23.5 L/min
6.2 gpm
Implement
34.3 L/min
9.1 gpm
57.8 L/min
15.3 gpm
Pump type Single gear
Maximum operating pressure 172.4 bar
2500 psi
Draft control sensing Position control
Remote control valves available Up to six rear remotes

3-point hitch

Type Category 1
Lift capacity, 24-in. behind link arms 995 kg
2194 lb

Power take-off (PTO)

Standard Independent Rear - 540 rpm
Optional Mid - 2100 rpm
Control Position control
Clutch Wet disc
Brake (for mid and rear PTO) Wet disc

Fluid capacities

Crankcase with filter 5.7 L
6 qt
Transmission and hydraulic system 26.5 L
7 U.S. gal.

Final drive

Type Bull Gear

Operator station

Rollover protective structure Type
Foldable
Yes
Platform - flat/straddle Flat
Gear shift location - console/floor PRT - Left-hand side

Cab

Compliance Complies with OSHA, SAE, and CSA standards for roll-over protection
Visibility 360 degree (angle)
Doors Two
Noise rating 80 dBA
Seat equipment Scissor-link

Dimensions

Wheelbase 172.7 cm
68 in.
Front axle clearance 30 cm
11.8 in.
Turning radius with brakes 2.7 m
8.8 ft
Turning radius without brakes 2.8 m
9.2 ft
Approximate shipping weight (open-station; cab) ROPS - 1315.4 kg
2900 lb
Cab - 1619.3 kg
3570 lb

Tires

Front Farm - 7-14
Turf - 27x8.50-15
Turf Special - 25/10.5LLx15
Industrial - 25x8.5-14 or 27x8.5-15
Rear Farm - 11.2-24
Turf - 41x14-20
Turf Special - 41x18LL-16.1
Industrial - 15-19.5 or 43x16-20
Front tread range 114 cm
44.9 in.
Rear tread spacing 103.1 cm
40.6 in.