x
Search Inventory    Search Products & Site

John Deere 3039R

John Deere 3039R

Double tap to zoom

John Deere 3039R

 

Features

  • Powerful and reliable Yanmar Diesel Engine
  • AutoConnect™ deck compatible for deck attach/detach in seconds
  • Cab or Open Station configuration available
  • PowrReverser™ or E-hydro transmission with Twin Touch™ pedals

Specifications

Key Specs

Engine power (gross) 28.5 kW
38.7 hp
PS at 2600 rpm
SAE J1995 rated power
Power take-off (PTO) power PRT - 24.4 kW
32.8 hp
eHST - 24.4 kW
Per SAE J1995
Steering hydraulics 23.5 L/min
6.2 gpm
Implement hydraulics 34.3 L/min
9.1 gpm
Hitch type Category 1
Lift capacity, 24-in. behind link arms 995 kg
2194 lb
Standard transmission; forward/reverse PowrReverser transmission (PRT)
Cruise control Standard
Approximate shipping weight (open-station; cab) Rollover protective structure (ROPS) - 1315.4 kg
2900 lb
Cab - 1619.3 kg
3570 lb
Wheelbase 172.7 cm
68 in.

Engine

Family FYDXL1.57TDA
EYDXL1.57TDA
GYDXL1.57TDA
Manufacturer Yanmar
Engine model 3TNV86CT-MJT
Engine power (gross) 28.5 kW
38.7 hp
PS at 2600 rpm
SAE J1995 rated power
Power take-off (PTO) power PRT - 24.4 kW
32.8 hp
eHST - 24.4 kW
Per SAE J1995
Rated engine speed 2600 rpm
Type Diesel
Injection pump type High pressure common rail direct injection
Aspiration Turbocharged
Emissions compliance Final Tier 4
Cylinders/displacement 3 / 1.57 L
3 / 95.7 cu in.
Number of cylinders Three
Cylinder liners Cast-in-block
Bore and stroke 86 x 90 mm
3.4 x 3.54 in.
Compression ratio 19.1:1
Lubrication Pressurized
Cooling system Liquid
Air cleaner Dual element
Engine torque at rated speed 105 Nm
77.4 lb-ft
Fuel tank capacity Rollover protective structure (ROPS): 37.4 L
10 U.S. gal.
Cab: 47.6 L
12.6 U.S. gal.

Electrical

Battery size 500 CCA
Alternator (12-V) 75 amp
Starter size 1.4 kW
1.9 hp

Fuel system

Type High pressure common rail direct injection
Fuel consumption
9.1 L/hr
2.4 gph

Transmission

Standard transmission; forward/reverse PowrReverser transmission (PRT)
Optional transmission; forward/reverse PRT only
Left-hand reverser eHydro transmission (eHST)
Transmission gear ranges 12F/12R PowrReverser (PRT)
Infinitely variable - 3 range
Final drive Bull Gear
Brakes Multi-plate wet disc
Steering Hydrostatic power steering
Clutch, wet/dry Wet
Axle capacity Front
1450 kg
3197 lb
Rear
1850 kg
4079 lb
Creeper SpeedMatch optional
Cruise control Standard

Hydraulics

Pump rated output Steering
23.5 L/min
6.2 gpm
Implement
34.3 L/min
9.1 gpm
57.8 L/min
15.3 gpm
Pump type Single gear
Maximum operating pressure 172.4 bar
2500 psi
Draft control sensing Position control
Remote control valves available Up to six rear remotes

3-point hitch

Type Category 1
Lift capacity, 24-in. behind link arms 995 kg
2194 lb

Power take-off (PTO)

Standard Independent Rear - 540 rpm
Optional Mid - 2100 rpm
Control Position control
Clutch Wet disc
Brake (for mid and rear PTO) Wet disc

Fluid capacities

Crankcase with filter 4.3 L
4.5 qt
Transmission and hydraulic system 24.6 L
6.5 U.S. gal.

Final drive

Type Bull Gear

Operator station

Rollover protective structure Type
Foldable
Yes
Platform - flat/straddle Flat
Gear shift location - console/floor PRT - Left-hand side

Cab

Compliance Complies with OSHA, SAE, and CSA standards for roll-over protection
Visibility 360 degree (angle)
Doors Two
Noise rating 80 dBA
Seat equipment Scissor-link

Dimensions

Wheelbase 172.7 cm
68 in.
Front axle clearance 30 cm
11.8 in.
Turning radius with brakes 2.7 m
8.8 ft
Turning radius without brakes 2.8 m
9.2 ft
Approximate shipping weight (open-station; cab) Rollover protective structure (ROPS) - 1315.4 kg
2900 lb
Cab - 1619.3 kg
3570 lb

Tires

Front Farm - 7-14
Turf - 27x8.50-15
Turf Special - 25/10.5LLx15
Industrial - 25x8.5-14 or 27x8.5-15
Rear Farm - 11.2-24
Turf - 41x14-20
Turf Special - 41x18LL-16.1
Industrial - 15-19.5 or 43x16-20
Front tread range 114 cm
44.9 in.
Rear tread spacing 103.1 cm
40.6 in.