Browse All Used Equipment »

5075E for sale at Taylor and Messick Inc.. Serving your new and used equipment needs from Harrington, Delaware.

John Deere 5075E

View Other Models:

Get a Quote

GET A QUOTE

Fields with asterisks* and highlighted red are required.

Please email our helpful staff with any questions or comments using the contact form.

Send to A Friend

SEND TO A FRIEND

Fields with asterisks* and highlighted red are required.

Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.

The 5075E Utility Tractor is available in either 2WD or MFWD configuration. The standard foot-operated differential lock applies power equally to both rear wheels, letting you pull through tougher ground conditions, while standard hydraulic wet disc brakes provide sure-footed stopping power.

ManufacturerJohn Deere
Model 5075E OOS
Official Test  
Nebraska Test number Factory Observed Results
Engine  
Manufacturer John Deere PowerTech 3029
Engine family CJDXL02.9088
Aspiration Turbocharged
Cylinders/Displacement, cu. in. (L) 3/179 (2.9)
Cylinder Liners Wet Sleeved
Fuel tank capacity, US Gal. (L) (Open; Cab) ---
Standard 18.0 (68.0)
Optional ---
Underhood muffler Yes
Performance  
Advertised PTO hp (kW) @ Rated rpm 61 (44.9) @ 2400 per SAE
Official PTO hp (kW) @ Rated rpm ---
@ Standard PTO @ Eng rpm ---
Maximum @ Eng rpm ---
Advertised Engine hp (kW) @ Rated speed 75 (55.0) @ 2400 per ISO 97/68/EC
Max Unballast Drwbr hp (kW) @ Eng rpm ---
Maximum Torque (PTO) @ rpm, lb-ft (Nm) ---
Max Torque Rise (80% rtd spd) @ Eng rpm ---
Maximum Torque Rise % (PTO) @ Eng rpm ---
Fuel Use, U.S. gal./hr & hp hr/gal. at:  
PTO @ Rated Eng rpm ---
Standard PTO Speed @ Eng speed ---
Maximum PTO Power @ Eng rpm ---
Maximum Engine Power @ Eng rpm ---
Max Unballasted Drawbar Power @ Eng rpm ---
75% Load, Full Engine rpm (Unballasted) ---
75% Load @ Reduced rpm (Unballasted) ---
Transmission  
Std. Transmission; Forward/Reverse 9F/3R
Opt. Transmission; Forward/Reverse 12F/12R PowrReverser
Reverser Optional
On-the-Go Shifting (Yes/No/Partial) Partial
Clutch; Wet/Dry Dry with 9F/3R; Wet with 12F/12R
Creeper ---
Power Take-Off (PTO)  
Standard Independent 540
Optional ---
PTO Speeds @ Engine rpm 540 @ 2400
PTO Actuation Mechanical (lever)
Hydraulics  
Type Open Center
Pump Rated Output, GPM (L/min.) ---
Standard 18.2 (68.8)
Optional ---
Rated Flow @ One SCV, GPM (L/min.) 11.4 (43.1)
Max Output @ SCV Couplers, GPM (L/min.) ---
Maximum Operating Pressure, psi (kPa) ---
Maximum Hydraulic Power, hp (kW) ---
Hitch Draft Control Load Sense Type Mechanical
Remote Control Valves Available 1 (2 opt.)
Hitch Category (SAE Designation) 2 ; convertible to 1
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. ---
OECD ---
Standard ---
Optional ---
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. (SAE) ---
Standard 3192 (1448)
Optional ---
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. (ASAE) ---
Standard ---
Optional ---
Sensing type Top Link
Joystick SCV control Optional
Final Drive  
Type Planetary
Differential controls Mechanical (Pedal)
Availability ---
Front No
Front & Rear No
Engage On-the-Go Rear Differential Lock Yes
Axle Type Flanged
Brakes, Type and Control Hydraulic Wet Disc
Operator Station  
Rollover Protective Structure, OOS ---
Rigid - Foldable - Telescopic Foldable, 2-Post
Platform - Flat/Straddle Straddle
Gearshift Location - Console/Floor Floor
Cab Optional
Doors Left hand; Right hand Optional
Platform - Flat/Straddle Straddle
dB(A) Rating ---
Seat Suspension System Mechanical
2WD Dimensions  
Wheelbase, in. (mm) 80.7 (2,050)
Front Tread Range, in. (mm) 56.9 - 81.9 (1,447 - 2,082)
Rear Tread Range, in. (mm) 55.8 - 71.7 (1,417 - 1,821)
Minimum Rear Tread Setting, in. (mm) 55.8 (1,417)
Front Axle Clearance, in. (mm) 18.8 (480)
Turning Radius w/Brakes, ft (m) 10.6 (3.18)
Turning Radius w/o Brakes, ft (m) 11.6 (3.50)
Unballasted Operating Weight, lb (kg) ---
Approx. Ship Wgt, lb (kg) Open; Cab 4,634 (2,102); ---
MFWD Dimensions  
Wheelbase, in. (mm) 80.7 (2,050)
Front Tread Range, in. (mm) ---
Front Axle Clearance, in. (mm) 13.4 (340)
Turning Radius w/Brakes, ft (m) 10.6 ft
Turning Radius w/o Brakes, ft (m) 11.6 ft
Limited Slip Differential ---
Unballasted Operating Weight, lb (kg) ---
Approx. Ship Wgt, lb (kg) Open; Cab 5070 (2300)
4WD Dimensions  
Wheelbase, in. (mm) ---
Wheel Tread, Min. to Max. in. (mm) ---
Turning Radius w/o Brakes, ft (m) ---
Nebraska Test Unballasted w/Duals, lb (kg) ---
Unballasted Weight, lb (kg) ---
Standard Tires  
2WD ---
Front 7.5 - 16 R1
Rear 16.8 - 28 R1
MFWD ---
Front 9.5 - 24 R1
Rear 16.9 - 28 R1
4WD ---
Track widths ---
Miscellaneous  
Country of Manufacture Pune, India
Ballasting Restrictions, lb (kg) ---
*Notes Updated: 06/08/2009
John Deere Parts Store

Now you can buy products and parts online. Introducing the NEW John Deere Parts Store. It's easy, fast and delivered right to your door.

John Deere Parts Store
Must See Items!

HOT deals on
selected equipment,
merchandise and more!

Take Advantage of Limited-Time Offers

Right now, John Deere makes it easier than ever to own the green and yellow. Check out great discounts on select products.